Communication Xperts, LLC .:. Bluetooth Barcode Scanners, Barcode Scanners, Microvision Scanners, ROV Scanners, Cheap Bar Code scanners

BlueAnt Bluetooth FAQ’s:

Q: How do I pair my BlueAnt Supertooth Light Car Kit?

First Time Pairing to your Bluetooth Mobile Phone
When you turn ON your Supertooth Light for the first time, it will automatically go into Pairing mode ready to be found by devices in Bluetooth searches.
Power ON your Supertooth Light. The Bluetooth Indicator will turn a blinking red/blue, the kit is now in pairing mode
If your car kit does NOT automatically go into pairing mode, Press the ACCEPT key on the front of the unit and hold this in. Then depress and release the microphone unit.
The Bluetooth Indicator will turn a blinking red/blue, when you see this, release the Accept Button. The kit is now in pairing mode.
While the kit is in pairing mode, access the Bluetooth menu of your phone. Turn
On the Bluetooth function then execute a Bluetooth search, or discover. (See
Your phone’s manual for specific instructions.)
When the phone displays the list of Bluetooth devices, select ST LIGHT.
When the phone asks for the password, enter 0000 and press Ok.
Set the ST LIGHT as a trusted/authorized device, if this is option in your phone.

Important Note: The kit is now paired. Most phones automatically connect to the kit after pairing. With some phones you need to connect manually after pairing.

Go back to Bluetooth > Paired devices > highlight ST LIGHT > press

Options > then press Connect.

Q: How do I pair my BlueAnt Z9i?

First turn the phone OFF and then back ON again to refresh its memory.
Bring the mobile phone to about 30cm from the Z9i Dual Microphone.
Find the Bluetooth menu in your mobile phone. Turn Bluetooth ON. (Check your mobile phone user guide if necessary)
With the Z9i OFF, Press and Hold the MFB (BlueAnt Logo) for about 6 seconds. The LED will appear a solid Blue, and then will start flashing. The Z9i is now in Pairing mode and ready to be found in searches by other Bluetooth devices. Pairing mode will be active for 2 minutes.
Perform a Bluetooth device discovery on your mobile phone to add a new device. (It takes a few seconds to search for and find other Bluetooth devices around you).
When Bluetooth devices are found, the phone will display “BlueAnt Z9i”. Scroll to it and press OK to confirm that you want to Pair with it.
Enter Passkey “0000” when your phone prompts you. The phone and Z9i will now Pair.
An additional security setting in your phone may be needed to allow the headset and phone to connect automatically
Without confirmation each time you connect your Z9i. Generally in the options for the BlueAnt Z9i, it will be referred to as “set as authorized”, “add to trusted devices”, ‘’allow connection’’ or similar.
If required for first time connection, select the BlueAnt Z9i to connect with your phone. OR, Click the MFB (BlueAnt Logo) on the Z9i, to connect with the phone.

Q: How does my Warranty work?

A: Warranty Terms and Conditions

1. BlueAnt will warrant the original purchaser of this product only.

2. BlueAnt will replace or repair any faulty product provided it has not been misused or abused in any way.

3. There are no user serviceable parts inside this product. Using a non-authorized repairer will Void the Warranty.

4. The Warranty is valid for 2 years (24 months) from the date of purchase.

• Proof of purchase must be provided to obtain warranty service. Your Communication Xperts Invoice is a valid Proof of Purchase

• Headset must be in original packaging with serial number for warranty to be valid.

5. Warranties are effective from the proof of purchase date and not from the date of any subsequent repair or replacement.

BlueAnt Warranty Process

1. Should you have difficulties in operation please refer to the online FAQ and support documents, or call us.

BlueAnt’s support number is on the back page of the user manual

2. Check our website for more information, updated manuals and troubleshooting. www.blueantwireless.com

3. BlueAnt Wireless Customer Service Team can help clarify whether you have a hardware or connection issue.

4. If your unit is confirmed to be faulty, a Return Merchandise Authorization

(RMA) will be issued from BlueAnt’s Customer Service Team.

5. Return the unit directly to BlueAnt for testing and replacement of faulty items.